Product ID:EXTREME PRESSURE LUBE #3
MSDS Date:08/01/1988
FSC:9150
NIIN:01-234-5110
MSDS Number: BMGZP

EVANS ENGINEERED PROD CO, CHICAGO MFG & DIST DIV

6581 MILL ST
GAGETOWN, MI 48735
US

Emergency Phone: 517-665-9913

Info Phone: 517-665-9913

Cage: 0BEZ8

EVANS ENGINEERED PRODUCTS CO

GAGETOWN, MI 48735 US

Telephone: 517-665-9913

Cage: 0BEZ8

SOLVENT DEASPHALTED RESIDUAL PETROLEUM OIL

CAS: 64741-95-3

Fraction By Weight: 59%

ACGIH TLV: 5 MG/M3

PARAFFIN WAXES AND HYDROCARBON WAXES, MICROCRYST

CAS: 63231-60-7

Fraction By Weight: 14%

RESIN ESTER

CAS: 6597-13-9

Fraction By Weight: 5%

POLYOXYETHYLENE DINONYLPHENYL ETHER PHOSPHATE

CAS: 39464-64-7

Fraction By Weight: 22%

FRAGRANCE COMPOUND

Fraction By Weight: 0.02%

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT AVAILABLE
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE-MAY CAUSE IRRITATION. SKIN-MAY
RESULT IN IRRITATION OR DERMATITIS ON PROLONGED OR REPEATED
EXPOSURE. INHALE-IN A MIST FORM MAY CAUSE LOCAL IRRITATION.
INGEST-MAY CAUSE LOCAL IRRITATION OF THE MUCO US MEMBRANES.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS LISTED BY THE
MANUFACTURER IN THIS PRODUCT IS LISTED BY IARC, NTP, OR OSHA AS A
CARCINOGEN.
Effects of Overexposure:EYE-MAY CAUSE BURNING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAE-REMOVE TO FRESH AIR IMMEDIATELY. EYE-FLUSH EYES WITH
CLEAR WATER FOR AT LEAST 15 MIN OR LONGER UNTIL IRRITATION
SUBSIDES. CALL PHYSICIAN. SKIN-REMOVE SOILED CLOTHES, WASH SKIN
WITH SOAP & WATER. INGES-DO NOT INDUCE VOMITING. CALL PHYSICIAN
IMMEDIATELY. INJECT-IF INJECTED BENEATH SKIN, REGARDLESS OF AMOUNT
INJECTED, CALL A PHYSICIAN.

Flash Point Method:COC
Flash Point:445F,229C
Lower Limits: 0.9
Upper Limits: 7.0
Extinguishing Media:FOAM, WATER SPRAY (FOG), CARBON DIOXIDE, DRY
CHEMICAL AND VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS MAY BE
USED.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS MAY BE
REQUIRED IN ENCLOSED AREAS. WATER MAY BE USED TO FLUSH SPILLS AWAY
FROM EXPOSURES. DENSE SMOKE IS GENERATED FROM BURN.
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS INCLUDE DENSE SMOKE &
FUMES, CARBON MONOXIDE & DIOXIDE, ALDEHYDES, NITROGEN OXIDES,
PHOSPHINE &/OR OTHER DECOMPOSITION PRODUCTS.

Spill Release Procedures:COLLECT SPILLS WITH SHOVEL, DRY SAND OR OIL
ABSORBANT MATERIALS. CLEAN SPILL AREA WITH AQUEOUS DETERGENT
SOLUTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN SEALED CONTAINERS AWAY FROM
HEAT, OPEN FLAME AND OXIDIZING MATERIALS.
Other Precautions:DO NOT TRANSFER TO UNMARKED CONTAINERS.

Respiratory Protection:NORMALLY NOT NEEDED AT AMBIENT TEMPERATURES AND
UNDER NORMAL CONDITIONS OF PRODUCT USE.
Ventilation:USE LOCAL EXHAUST TO CAPTURE VAPOR, MISTS, SPRAY AND/OR
FUMES IF NECESSARY.
Protective Gloves:CHEMICAL RESISTANT SYNTHETIC RUBBER
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR OTHER
IMPERVIOUS CLOTHING IF REQUIRED TO PREVENT CONTAMINATION OF REGULAR
CLOTHING.
Work Hygienic Practices:CLENSE SKIN THOROUGHLY AFTER CONTACT. PRODUCT
MAY BE REMOVED BY USE OF WATERLESS HAND CLEANER, THEN WASH WITH
SOAP/WATER
Supplemental Safety and Health
KEEP CONTAINER CLOSED WHEN NOT INUSE. WHEN USING PRODUCT WITH A HIGH
PRESSURE GREASE GUN, AVOID INJECTION OF THE PRODUCT BENEATH SKIN OR
INTO OTHER PARTS OF THE BODY.

HCC:V6
Boiling Pt:B.P. Text:246F,119C
Melt/Freeze Pt:M.P/F.P Text:130F,54C
Vapor Pres:0.3 MM
Vapor Density:>20 AIR=1
Spec Gravity:0.9510
Evaporation Rate & Reference:NON-VOLATILE AT ROOM TEMP
Solubility in Water:NIL
Appearance and Odor:GREASE-LIKE SEMI-SOLID, DARK COLOR, PLEASANT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN
FLAMES.
Hazardous Decomposition Products:IF HEATED IN AIR = OXIDES OF
PHOSPHORUS, CARBON & NITROGEN, ALDEHYDES, PHOSPHINE & OTHER TOXIC
OXIDES & FUMES.

Waste Disposal Methods:WASTE MATERIL SHOULD BE DUMPED OR BURIED IN AN
APPROVED INDUSTRIAL WASTE LAND FILL. USED PRODUCT MAY BE SUITABLE
FOR RECLAMATION OR RE-REFINING IF NOT CONTAMINATED. DISPOSAL MUST
COMPLY WITH ALL GOVER NMENTAL REGUL;ATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.